What the Copper Spur UL4 Footprint Does
The Copper Spur UL4 Footprint is a dedicated ground cloth made by Big Agnes for the Copper Spur UL4 tent. Its two core jobs are simple: extend the life of your tent floor by adding a sacrificial layer between you and the ground, and enable a Fast Fly shelter configuration that leaves the tent body behind.
That second job is the one many campers overlook. The footprint is not just a protector—it is a required component for pitching the Copper Spur UL4 in Fast Fly mode. According to the catalog, Fast Fly requires the footprint, tent fly, poles, and stakes. Without the footprint, you cannot build that lighter shelter.
Copper Spur UL4 Footprint at a Glance
- Copper Spur UL4 Footprint: To extend the life of your tent floor, we recommend using a Big Agnes footprint or ground cloth. This is the manufacturer's stated purpose: the footprint is a wear layer that takes the abrasion and dirt instead of your tent floor.

Copper Spur UL4 Footprint - Copper Spur UL4 Footprint: The Big Agnes footprint also enables you to pitch a lightweight, Fast Fly shelter while leaving the tent body behind. If you want to save weight on quick trips or in warm weather, the footprint is what makes that ultralight setup possible.
- Copper Spur UL4 Footprint: The Fast Fly configuration requires the footprint, tent fly, poles, and stakes. This is a hard requirement, not an optional extra. Packing the footprint is non-negotiable if you plan to use Fast Fly.
How to Set Up the Footprint for Fast Fly
The catalog does not provide a step-by-step pitching sequence, so the steps below are a logical order based on the required components. Always follow the instructions that come with your tent and footprint for the exact procedure.
- Lay out the footprint: Unfold the Copper Spur UL4 Footprint on a clear, level area. Orient it so the corners align with where the tent poles will anchor.
- Assemble the poles: Connect the tent poles according to your Copper Spur UL4 instructions. The poles are one of the four required components for Fast Fly.
- Attach the fly to the poles: Drape the tent fly over the assembled poles and secure it at the attachment points. The fly replaces the tent body in this configuration.
- Stake out the footprint and fly: Use the stakes to tension the footprint and fly together. The catalog confirms stakes are required, but does not specify stake count or placement—check your tent's pitch instructions.
- Check tension and coverage: Make sure the fly is taut and the footprint edges sit under the fly's drip line. The catalog does not give a specific overhang measurement, so use your judgment and the tent's design as a guide.
Footprint vs Tent Floor: What You Actually Gain
A tent floor is the bottom of your tent body—it is sewn in and not removable. A footprint is a separate ground cloth that sits underneath. The main trade-off is simple: a footprint adds a small amount of weight and pack space, but it takes the abrasion, punctures, and dirt that would otherwise hit your tent floor.
For the Copper Spur UL4, the footprint also unlocks Fast Fly mode. That means you are not just protecting the floor—you are gaining a lighter pitching option for trips where you want to leave the tent body at home. If you never plan to use Fast Fly, the footprint is still a reasonable investment in floor longevity, but the Fast Fly capability is the strongest reason to carry it.
When the Copper Spur UL4 Footprint Makes Sense
- You want to extend the life of your tent floor: The catalog explicitly recommends a footprint or ground cloth for this purpose. If you camp on abrasive surfaces like rock, gravel, or hard-packed dirt, the footprint is a cheap insurance policy.
- You plan to use Fast Fly: Fast Fly requires the footprint, fly, poles, and stakes. If you want a lighter shelter for quick overnighters or warm-weather trips, the footprint is mandatory.
- You want to leave the tent body behind: Fast Fly lets you pitch a shelter without the tent body. This is useful when you want to save weight or when the body is wet and you want to pack it separately.
What the Catalog Does Not Confirm
The supplied product information does not include dimensions, weight, packed size, or material specifics for the Copper Spur UL4 Footprint. It also does not provide a detailed pitching sequence beyond the required components for Fast Fly. If you need exact measurements or weight, check the product page or the manufacturer's specifications before you buy.
The catalog also does not state care instructions for the footprint. As a general practice, shake off dirt and debris before packing, and store it dry to prevent mildew. For specific cleaning or repair guidance, refer to Big Agnes documentation.


