When to Replace Your mtnGLO Light Controller
The mtnGLO Light Controller from Big Agnes is the brain of your tent or sleeping bag lighting system. Over time, buttons may become less responsive, the unit may stop turning on, or the cord may wear out. Replacing the controller is a straightforward way to restore full functionality without buying a whole new lighting system.
This guide covers what the replacement controller does, how to install it, and how to care for it so your mtnGLO setup lasts longer.
What the Replacement Controller Does
- mtnGLO® Light Controller: The mtnGLO Light Controller is a replacement controller designed for use with any Big Agnes mtnGLO system. You don't need to worry about compatibility with different tent or sleeping bag models; this one part works across the entire mtnGLO lineup.

mtnGLO® Light Controller - mtnGLO® Light Controller: It provides a straightforward way to manage your tent or sleeping bag lighting, helping you keep your gear functioning as intended. A working controller means reliable light when you need it—no fumbling in the dark or dealing with a dead system.
- mtnGLO® Light Controller: Simple to install and operate. You can swap the controller yourself in minutes without special tools or technical skills.
How to Replace the mtnGLO Light Controller
The replacement process is designed to be simple. Follow these steps to swap the old controller for a new one.
- 1. Disconnect the old controller: Unplug the existing light controller from the mtnGLO lighting strip or cord. Depending on your setup, this may be a simple pull-apart connector.
- 2. Connect the new controller: Plug the new mtnGLO Light Controller into the same connector. It should fit securely with a gentle push.
- 3. Test the lights: Turn on the controller to verify that the lights respond correctly. If they don't, check the connection and ensure it's fully seated.
Caring for Your mtnGLO Light Controller
To extend the life of your mtnGLO Light Controller, keep the connector clean and dry. When not in use, store the controller in a dry place, away from direct sunlight and extreme temperatures. Avoid pulling on the cord or twisting the unit, as this can damage internal connections.
If the controller stops working after a fall or moisture exposure, it may need replacement. The supplied information does not cover repair of the controller itself, so a replacement is the recommended fix.
What the Supplied Information Does Not Confirm
The catalog confirms that the mtnGLO Light Controller is compatible with all Big Agnes mtnGLO systems and is simple to install. It does not provide specific instructions for troubleshooting intermittent issues, repairing a damaged cord, or cleaning the controller. For those situations, replacing the controller is the straightforward solution.


