Why the C Bar 3 Footprint Earns Its Place
A tent floor takes a beating from rocks, roots, and abrasive ground. The C Bar 3 Footprint is designed to sit under your tent and extend the life of the floor, according to the catalog. It also enables a Fast Fly shelter configuration when you want to leave the tent body behind.
At USD 39.60 (compared to a USD 60.00 list price), it is a straightforward add-on for anyone who wants to protect their investment or try a lighter pitch. But it only works well if you understand its fit and setup requirements.
What the Catalog Confirms
- C Bar 3 Footprint: The C Bar 3 Footprint is recommended to extend the life of your tent floor. This is the core protection benefit: a sacrificial layer that takes abrasion instead of your tent floor.

C Bar 3 Footprint - C Bar 3 Footprint: The footprint enables a lightweight Fast Fly shelter while leaving the tent body behind. This gives you a second, lighter setup option for trips where you want to cut weight or reduce condensation.
- C Bar 3 Footprint: The Fast Fly configuration requires the footprint, tent fly, poles, and stakes. You need all four components to pitch Fast Fly; the footprint alone is not a shelter.
Setting Up the C Bar 3 Footprint for Fast Fly
Use this sequence when you want to pitch the Fast Fly shelter. The catalog confirms the required components but does not provide step-by-step pitching instructions, so follow the general order below and rely on your tent's own setup guide for pole and fly details.
- Lay out the footprint: Spread the C Bar 3 Footprint on a clear, level area. Smooth out wrinkles so it sits flat.
- Assemble poles and stake the footprint: Set up your tent poles according to your tent's instructions. Stake the footprint at its corners to keep it in place.
- Attach the fly: Drape the tent fly over the poles and secure it to the footprint and poles as designed.
- Stake out the fly: Complete the pitch by staking out the fly. The Fast Fly configuration requires the footprint, tent fly, poles, and stakes.
When to Use a Tent Footprint
A footprint is most valuable on rough or abrasive ground—think granite slabs, gravel, or thorny sites—where the tent floor would otherwise wear quickly. It also helps keep the floor cleaner and can reduce small punctures. Use the C Bar 3 Footprint whenever you want to extend the life of your tent floor, as the catalog recommends.
For Fast Fly use, bring the footprint along with your fly, poles, and stakes. This configuration is ideal for minimalist trips or warm, dry conditions where you want to leave the tent body behind. The catalog does not specify weather ratings for Fast Fly, so assess conditions yourself and pitch accordingly.
Footprint Care and Folding
The catalog does not provide specific care instructions for the C Bar 3 Footprint, so the following are general best practices for tent footprints. Always defer to any care labels or manufacturer guidance that come with your product.
- Clean before storage: Shake off dirt and debris, and wipe with a damp cloth if needed. Allow to dry completely before packing.
- Fold rather than stuff: Folding along original creases helps maintain shape and makes it easier to pack. Avoid sharp creases in the same spot repeatedly.
- Store loosely: Keep the footprint in a dry, ventilated space. Avoid compressing it tightly for long periods.
- Inspect for wear: Check regularly for tears or thin spots. A worn footprint is less effective at protecting your tent floor.
Fit and Compatibility Notes
The C Bar 3 Footprint is designed for the C Bar 3 tent, but the catalog does not list dimensions or confirm compatibility with other models. For the intended fit, use it with the C Bar 3. If you plan to use it with a different tent, verify the footprint's size against your tent floor dimensions before relying on it.
The Fast Fly configuration requires the specific footprint, fly, poles, and stakes for your tent. Substituting components may not work as intended.


